All Categories > Heaters > Strip/Clamp-On Heaters > Mineral Insulated (MI) Strip Heaters > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Mineral Insulated (MI) Strip Heaters

 width=
Check up to five results to perform an action.
 width=


The MI strip heater is a thin, responsive heater setting unmatched standards for performance and durability. It makes use of the most advanced heater construction techniques, including embedding a nickel-chromium element wire in an exclusive mineral insulation. Watlow’s exclusive mineral insulation is a material with a much higher thermal conductivity than the mica and hard ceramic insulators used in conventional heaters. This thin layer of insulation brings the element wire closer to the heater sheath, resulting in easy heat flow from the element wire to the sheath. This allows the wire to run cooler than conventional heaters and increases heater life.

Search Items
Mineral Insulated (MI) Strip Heaters

larger image
Mineral Insulated (MI) Strip Heaters-2

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 8 of 8 Unit of Measure: Imperial | Metric | Both  1 

Code No.

Width

Length

Voltage

Watt Density

MS1J8AS1 1.5 in
38.0 mm
8 in
203 mm
120 VAC 48 W/in²
7.4 W/cm²
MS1J8AS3 1.5 in
38.0 mm
8 in
203 mm
240 VAC 50 W/in²
7.8 W/cm²
MS1J12AV2 1.5 in
38.0 mm
12 in
305 mm
120 VAC 26 W/in²
4.0 W/cm²
MS1J12AV3 1.5 in
38.0 mm
12 in
305 mm
240 VAC 26 W/in²
4.0 W/cm²
MS1J12AS1 1.5 in
38.0 mm
12 in
305 mm
120 VAC 49 W/in²
7.6 W/cm²
MS1J12AS2 1.5 in
38.0 mm
12 in
305 mm
240 VAC 49 W/in²
7.6 W/cm²
MS1J18AS1 1.5 in
38.0 mm
18 in
457 mm
120 VAC 40 W/in²
6.2 W/cm²
MS1J18AS2 1.5 in
38.0 mm
18 in
457 mm
240 VAC 40 W/in²
6.2 W/cm²
  Results 1 - 8 of 8 1